Kärcher HD 690, Руководство пользователя

Страница: 6 / 14

English Operating Instructions HD 650 (SX) / HD 690 (SX)
15
Warranty
The warranty terms issued by our authorised
marketing company are valid in every
country. We remedy any fault in the cleaner
free of charge within the warranty period
providing the cause of the fault proves to be
a material or manufacturing error.
The warranty only becomes operative
when your dealer has completed the reply
card accompanying the sale of the unit, has
stamped and signed it and you have then
sent the reply card to the marketing
company in your country.
Should you wish to call upon the guarantee,
please apply to your dealer or nearest
authorised Customer Service centre taking
along also the accessories and bill of sale.
Preparing the cleaner for
use
Unpack the cleaner
– When unpacking the cleaner, check the
contents of the packaging. If there has
been any damage in transit inform the
dealer.
– Do not dispose of the packaging with the
household rubbish, hand it in at the
appropriate collection point for recycling.
Check the oil level
Fig. –
„
Screw out the fastening screws on the
left and right of the unit cover, remove
unit cover.
„
Cut off the tip on the cover to the oil
reservoir.
„
Check the oil level in the oil reservoir.
„
Fasten the unit cover.
Mount the accessories
Fig. –
„
Mount handle (screws and nuts
supplied).
„
Engage the holder for handgun at the
side of the handle.
„
Mount nozzle on the spray lance (see
markings on the top of the setting ring).
„
Mount spray lance on the handgun.
„
Insert and engage the crank handle in
the hose-reel axle.
„
Mount the high-pressure hose on the
hose reel. Insert the high-pressure hose
nipple through the opening in the hose-
reel hub and into the hose holder. Secure
the high-pressure hose with the hook.
„
Check: It should not be possible for the
hose nipple to be pulled out.
„
It is advisable to lay the high-pressure
hose out in a straight line before reeling
it up.
„
Wind the high-pressure hose up in even
layers on the hose reel by turning the
crank handle.
Using the cleaner for the
first time
Electrical connection
Caution!
The voltage specified on the model
rating plate must correspond to the
voltage supplied.
Caution!
Use an extension cable whose cable
cross-section is adequate (10 m =
1.5 mm², 30 m = 2.5 mm²) and unreel
it completely from the cable drum.
For connected loads see model rating
plate/Technical Specifications.
www.motralec.com