Kärcher HD 1040 B Cage, Руководство пользователя

Страница: 18 / 264

– 6
–
Loosen the dirt:
Spray detergent economically and let it
work for 1...5 minutes but do not let it
dry up.
–
Remove the dirt:
Spray off loosened dirt with the high
pressure jet.
 Set dosing value for detergent to "0".
 Open the hand spray gun and rinse the
appliance for at least 1 minute.
 Release the lever on the trigger gun.
Note
When the lever of the hand spray gun is re-
leased, the engine continues to run at the
operating speed. The water thus circulates
within the pump and gets heated. When the
cylinder head at the pump has reached the
maximum permissible temperature (80 °C),
the safety thermostat at the cylinder head
switches off the engine. The appliance can
be restarted after being cooled down to be-
low 50 °C.
Cooling can be hastened while using com-
pressed water from the water supply pipes:
 Pull the lever of the hand spray gun for
2 - 3 minutes so that the circulating wa-
ter cools down the cylinder head.
 Restart the engine.
After operating the water using saline water
(sea water), open the hand spray gun and
rinse the appliance for at least 2 - 3 minutes
using tap water.
 Set the appliance switch at the engine
to OFF and close the fuel supply valve.

Shut off water supply.

Activate hand spray gun until device is
pressure-less.
 Secure the hand spray gun using the
safety catch so that it doesn't open ac-
cidentally.
 Remove the water inlet hose from the
appliance.
Caution
Risk of injury and damage! Observe the weight
of the appliance when you transport it.

Grab the appliance by the handle, lift it
up and push to transport it across long-
er distances.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.

Danger
Risk of injury if the machine is left running
in an unattended state. Remove the spark
plug before doing any work on the appli-
ance.
Risk of burns! Do not touch hot silencers,
cylinders or radiator ribs.
 Check oil level.
Please contact Customer Service immedi-
ately if the oil is milky (water in oil).

Clean the sieve in the water connection.

Clean filter at the detergent suck hose.
Oil change:
 Ready a catch bin for appr. 1 Liter oil.
 Turn out the oil drain screw.
 Drain the oil in a collection basin.
Recommended cleaning method
After operation with detergent
Interrupting operation
Turn off the appliance
Transport
Storage
Maintenance and care
High-pressure pump
Weekly
Monthly
After 500 operating hours, at least annu-
ally.
18 EN