background image

10  English

Detergents can only be applied with the black 
detergent nozzle.
 

  STEP 1:

  

  Install the black detergent nozzle for deter-

gent application at low pressure.

 

  STEP 2:

 

  Fill the tank with Kärcher detergent.

 

  STEP 1:

Move the engine throttle switch to the OFF 
position.

 

  STEP 2:

 

  Release trigger and engage safety lock.

Detergents

TAKING A BREAK ...five minutes or more

WORKING WITH DETERGENTS

 CAUTION

This unit has been designed for use with cleaning 
detergents recommended by the manufacturer.

The use of other cleaning detergent may affect the 
operation of the machine and void the warranty.

Always Use Kärcher Detergent for Best Results

Kärcher biodegradable detergents are specially 
formulated to protect the environment and your 
pressure washer. The special formula won't clog 
the suction tube filter and will protect the internal 
parts of the pressure washer for a longer life. For 
Kärcher Detergents, check your retailer or visit 
our website:

karcher.com/us

 CAUTION

Never use:

–    Bleach, chlorine products or other corrosive 

chemicals

–    Liquids containing solvents (i.e., paint thin-

ners, gasoline, oils.)

–    Tri-sodium phosphate products

–    Ammonia products

–    Acid-based products

These chemicals will harm the unit and will damage 

the surface being cleaned.

Use of these items will void the warranty.

  

STEP 3:

 

  With the engine running, pull trigger to operate 

unit.

 

  Liquid detergent is drawn into the unit and 

mixed with water.

 

  Apply detergent to work area.

 

  Do not allow detergent to dry on surface.

  

STEP 4:

  

Always

 draw fresh water through the deter-

gent suction tube when the cleaning job is 
done, to rinse/flush any remaining detergents 
from the injection system.

For best results see Cleaning Tips for specific 
information on how to clean different surfaces.

Содержание G 3200 XK

















Отзывы: