English
7
Illustration 1:
Pass the detergent siphon hose (A) under
the machine, aligning the detergent fill hole
on the detergent tank (B) towards the front of
the machine. Place detergent hose (A) into
the detergent hose hole on the back of the
detergent tank (B), and insert until the hose
end rests on the bottom of the deepest part
of the tank.
Illustration 2:
Insert hexagonal ¼” bolts (C) into tank knobs
(D). Insert through the flanges on the edges
of the detergent tank (B), into the holes on
the frame, and tighten.
Illustration 3:
Feed axle (G) through hub of wheel (E),
and spacer ½" (F). Insert assembly into axle
mount at back of frame. Push straight side of
cotter pin (H) through hole in axle until locked
in place. Repeat on other side of unit.
Assembling
Assembling
1
1
7
8
Illustration 4:
Mount nozzle holder (K) to handle as shown
in illustration, align holes, insert ¼” carriage
bolts (L) and secure with knob with nut
(M).
Illustration 5:
Attach the handle to the frame of the pres-
sure washer. Align holes in handle with holes
in lower frame, insert carriage bolts (I), and
tighten with knobs (J).
Illustration 6:
Place the quick connect nozzles (N) in the
nozzle holder (K).
Illustration 7:
Push the wand (O) into the spray gun (P) and
then thread the connection to secure.
Illustration 8:
Remove the cap/dipstick from the engine and
add correct amount of oil. Be sure oil level is
between “FULL/MAX” and “ADD/MIN” marks
on dipstick with machine on level surface.
Replace cap/dipstick.
O
P
D
C
B
J
I
K
L
M
N
K
1
1
1
2
1
6
5
4
A
B
1
3
G
E
F
H
