Kärcher G 3050 OH, Руководство пользователя

Страница: 9 / 16

English
9
The color-coded quick connect nozzles pro-
vide a wide array of spray widths from 0° to
65° and are easily accessible when placed
in the convenient nozzle holder.
For particularly stubborn accumulation of
grime.
Not recommended for soft materi-
als like sidings, decks, painted surfaces,
cars.
For dirt accumulation over a surface.
For dirt accumulation over a large surface.
For moderate dirt accumulation over a large
surface.
For operating with detergent or cleaning
with low pressure.

WARNING
High pressure in nozzle area.
Risk of injury caused by improperly
locked nozzle.
„ Make sure you hear a ‘click’ when in-
serting the nozzle tip into the wand.
„ Pull the nozzle to make sure it is seated
properly before operating your unit.
Please use exclusively KÄRCHER deter-
gents and care products to carry out the re-
spective cleaning task, as these were
specifically developed for your appliance.
The use of other detergents and care prod-
ucts may lead to premature wear and can
invalidate your warranty claims. Please ob-
tain information at your local dealer or re-
quest information directly from KÄRCHER.
Detergents can only be applied with the
black detergent nozzle.
Î Install the black detergent nozzle for de-
tergent application (will work at low
pressure only).
Î Fill a container with Kärcher detergent.
Place the filter end of detergent suction
tube into the container.
Î With the engine running, pull trigger to
operate unit.
Liquid detergent is drawn into the unit
and mixed with water.
Apply detergent to work area.
Do not allow detergent to dry on sur-
face.
Î Always draw fresh water through the
detergent suction tube when the clean-
ing job is done, to rinse/flush any re-
maining detergents from the injection
system.
Quick connect nozzles
0° spray angle = Red nozzle
15° spray angle = yellow nozzle
25° spray angle = Green nozzle
40° spray angle = White nozzle
65° spray angle = Black detergent nozzle
Working with detergent