12
English
Î
1:
Disconnect all water connections.
Î
2:
Turn on the machine for a few seconds, un-
til the water which had remained in the pump
exits, turn off immediately.
Î
3:
Do not allow high pressure hose to become
kinked.
Î
4:
Store the machine and accessories in a
room which does not reach freezing tempera-
tures. DO NOT store near furnace or other
sources of heat as it may dry out the pump
seals.
CAUTION
Failure to follow the above directions will result in
damage to the pump assembly and accessories
and will void the warranty.
Kärcher
®
also recommends the regular practice of
using a pump protector like “Kärcher
®
Pump
Guard” to prevent cold weather damage during
storage in the winter months.
All Kärcher pumps ship with oil already inside di-
rect from the factory. There is no need to add oil.
You should routinely make a visual inspection of
the pressure washer’s pump. If you notice oil leak-
ing around the pump seals, you should take the
pressure washer to a Kärcher-Authorized Service
Center for repair. (You can locate a service center
in your area online at www.karcherresiden-
tial.com)
The pump on your Kärcher pressure washer does
not require maintenance. Any attempts to service
or alter the pump may damage your pressure
washer and void your product warranty.
Carry out maintenance tasks for the engine ac-
cording to the specifications provided in the oper-
ating instructions provided by engine
manufacturer.
(with or without detergent)
. Pre-rinse deck and
surrounding area with fresh water. If using deter-
gent, apply to surface at low pressure. For best re-
sults, limit your work area to smaller sections of
approximately 25 square feet. Allow detergent to
remain on surface 1-3 minutes. Do not allow de-
tergent to dry on surface. Rinse at high pressure
in a long sweeping motion keeping the spray noz-
zle approximately 3-6 inches from the cleaning
surface. Always clean from top to bottom and from
left to right. When moving on to a new section of
the cleaning surface, be sure to overlap the previ-
ous section to eliminate stop marks and ensure a
more even cleaning result.
몇
CAUTION
Do not use Dirtblaster spray nozzle on wood
surface as it may cause damage.
(with or without detergent).
Pre-rinse cleaning
surface with fresh water. If using detergent, apply
to surface at low pressure (for best results, limit
your work area to sections of approximately 6 feet
and always apply detergent from bottom to top).
Allow detergent to remain on surface 1-3 minutes.
Do not allow detergent to dry on surface, if surface
appears to be drying, simply wet down surface
with fresh water. If needed, use special wash
brush attachment (not included) to remove stub-
born dirt. Rinse at high pressure from top to bot-
tom in an even sweeping motion keeping the
spray nozzle approximately 6 inches from the
cleaning surface.
몇
CAUTION
Do not use Dirtblaster spray nozzle on siding
as it may cause damage.
WINTERIZING AND LONG-TERM STORAGE
MAINTENANCE INSTRUCTIONS
Kärcher pump
Initial Use
Pump Inspection
Pump Maintenance
Engine
CLEANING TIPS
Deck Cleaning
House Siding
