background image

9.800-082.0  • 15751000-1100 • Rev. 04/09

OPERATOR’S MANUAL

        

PRESSURE WASHER

  

4

INTRODUCTION & IMPORTANT SAfETy INfORMATION

Thank you for purchasing this Pressure Washer.

We  reserve  the  right  to  make  changes  at  any  time 

without incurring any obligation.

Owner/User Responsibility:

The owner and/or user must have an understanding of 

the manufacturer’s operating instructions and warnings 
before using this pressure washer. Warning information 
should be emphasized and understood. If the operator 
is  not  fluent  in  English,  the  manufacturer’s  instruc-
tions  and  warnings  shall  be  read  to  and  discussed 

with the operator in the operator’s native language by 
the purchaser/owner, making sure that the operator 

comprehends its contents.

Owner and/or user must study and maintain for future 

reference the manufacturers’ instructions.
The  operator  must  know  how  to  stop  the  machine 
quickly and understand the operation of all controls. 

Never  permit  anyone  to  operate  the  engine  without 

proper instructions.

This manual should be considered a permanent 

part of the machine and should remain with it 
if machine is resold.
When ordering parts, please specify model and 
serial number. Use only identical replacement 
parts.
This  machine  is  to  be  used  only  by  trained 
operators.

IMPORTANT SAfETy 

INfORMATION

READ OPERATOR’S 

MANUAL THOROUGHLy 

PRIOR TO USE.

WARNING: To reduce the risk 
of  injury,  read  operating  in-
structions carefully before us-
ing.

  1.  Read  the  owner's  man

-

ual  thoroughly.  Failure  to 
follow  instructions  could 
cause  malfunction  of  the 
machine  and  result  in 
death,  serious  bodily  in-

jury and/or property damage.

  2.  Know how to stop the machine and bleed pressure 

quickly. Be thoroughly familiar with the controls.

  3.  Stay alert — watch what you are doing.

  4.  All  installations  must  comply  with  local  codes. 

Contact your electrician, plumber, utility company 
or the selling distributor for specific details.

WARNING

RISk Of 

ASPHyxIATION:  USE 

THIS PRODUCT ONLy IN 

A WELL 

vENTILATED AREA.

WARNING: Risk of asphyxiation. 
Use this product only in a well 
ventilated area.

   5.  Avoid  installing  machines  in 

small areas or near exhaust 
fans.  Exhaust  contains  poi-
sonous carbon monoxide gas; 
exposure may cause loss of 
consciousness and may lead 
to  death.  It  also  contains

    chemicals known, in certain quantities, to cause 

cancer, birth defects or other reproductive harm.

WARNING

RISk Of fIRE.  

DO NOT ADD fUEL 

WHEN OPERATING 

MACHINE.

WARNING: Risk of fire. Do not 
add  fuel  when  the  product  is 
operating.
WARNING:  Risk  of  explosion 
—   do  not  spray  flammable 
liquids.

  6.  D o   n o t   p l a c e   m a c h i n e 

n e a r   f l a m m a b l e   o b -
jects  as  the  engine  is  hot.

WARNING: This product contains chemicals known 
to the state of California to cause cancer and birth 
defects or other reproductive harm. Operation of 
this equipment may create sparks that can start 
fires around  dry vegetation. A spark arrestor may 
be required. The operator should contact: Local 
fire agencies for laws or regulations relating to fire 
prevention requirements.

  7.   Allow engine to cool for 1-2 minutes before refu

-

eling. If any fuel is spilled, make sure the area is 
dry before testing the spark plug or starting the 

engine. (Fire and/or explosion may occur if this is 

not done.)

    Gasoline engines on mobile or portable equipment 

shall be refueled:

    a.  outdoors;
    b.  with the engine on the equipment stopped;

    c.  with  no  source  of  ignition  within  10  feet  of 

 

 

the dispensing point; and

    d.  with an allowance made for expansion of the  

 

fuel  should  the  equipment  be  exposed  to  a  

 

higher ambient temperature.

    In an overfilling situation, additional precautions 

are  necessary  to  ensure  that  the  situation  is 
handled in a safe manner.

WARNING:  Risk  of  injury.  Disconnect  battery 
ground terminal before servicing.

  8.  Transport/repair with fuel tank EMPTY or with fuel 

shut-off valve OFF. 

Содержание DG-232437




























Отзывы: