manualshive.com logo in svg

Kärcher Chariot CV 60/1 RS KIRA Autonomous, Руководство пользователя

Поделиться
Скачать
Kärcher Chariot CV 60/1 RS KIRA Autonomous Скачать руководство пользователя страница 38

38

Maintenance

Error Codes Table, cont.

Code

Description of code

Corrective actions – If the problem persists, call for 
service

33

Brush Motor High Voltage Protect Error Locate the brush motor circuit breaker and reset.

34

Side Broom Motor High Voltage Protect 

Error

Turn the main breaker off and wait 10 seconds before 
turning it back on. 

35

Drive Motor High Voltage Protect Error

Ensure that the grade is appropriate for the machine. 

Turn the main breaker off and wait 10 seconds before 
turning it back on. 

36

Vacuum Motor High Voltage Protect 

Error

Turn the main breaker off and wait 10 seconds before 
turning it back on. 

37

CAN1 Failure 

Turn the main breaker off and wait 10 seconds before 
turning it back on. 

80

The battery is dead and will need to be 

charged. The machine will no longer 

transport.

Key the machine off. To push the machine to a charging 
location, locate break lever on the right hand side of the 
traction motor and lift. Charge the battery.
For lithium only, ensure that the blue battery light located 
in the left hand door is solid while charging. 
If the light is blinking or off continue to press the button 
until it remains solid.

81

The vacuum bag is missing install a 

bag to allow cleaning. Transport mode 

is still allowed.

Install a vacuum bag. Or make sure the vacuum bag is 
seated correctly

82

The battery is dead and will need to be 

charged. Transport mode is still 

allowed.

Transport the machine to a charging location, key the 
machine off and charge the battery.
For lithium only, ensure that the blue battery light located 
in the left hand door is solid while charging. If the light is 
blinking or off continue to press the button until it remains 
solid. 

83

Side Broom Motor PWM is being 

limited by unspecified source.  

All modes are still allowed.

Disconnect power with the main breaker, remove the side 
broom and clean

84

Side Broom Motor Limited. The 

controller is driving but a power-limiting 

condition is active.

 All modes are still allowed.

Disconnect power with the main breaker, remove the side 
broom and clean

85

Side Broom Motor Temperature High. 

PWM limiting within range of High 

Motor Temperature. 

All modes are still allowed.

Disconnect power with the main breaker, remove the side 
broom and clean

8.644-976.0 Manual Operator CV601 RS KIRA Autonomous

Содержание Chariot CV 60/1 RS KIRA Autonomous











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды