18
English
2
Suction lip
1. Remove the suction bar.
2. Unscrew the star handles.
3. Pull off the plastic parts.
4. Pull off the suction lips.
5. Push in the turned over or new suction
lips.
6. Push on the plastic parts.
7. Screw in and tighten the star handles.
Cleaning the coarse dirt filter
1. Open the waste water tank cover.
1
Coarse dirt filter
2. Pull the coarse dirt filter upwards and off.
3. Rinse off the coarse dirt filter under run-
ning water.
4. Reinsert the coarse dirt filter into the
waste water tank.
Cleaning the fresh water filter
1. Drain the fresh water (see Chapter
Draining fresh water
).
2. Unscrew the fresh water tank lock.
1
Fresh water tank lock
2
Fresh water filter
3. Pull out the fresh water filter and rinse
with clean water.
4. Insert the fresh water filter.
5. Fit the fresh water tank lock.
Note:
Take care to ensure that the hose
connection in the fresh water tank cap is
positioned at the lowest point in the tank
after screwing the cap in place.
Clean the float and fluff filter
1. Open the waste water tank cover.
1
Latching hooks
2
Float
3
Fluff filter
4
Float housing
2. Release the latching hooks.
3. Pull the float housing downwards and
off.
4. Remove the float from the float housing
and clean it.
5. Remove the fluff filter and clean it.
6. Assemble all parts in the reverse order.
Replacing the disc brushes
1. Raise the cleaning head.
2. Press the brush replacement pedal
down, beyond the zone of resistance.
3. Pull the 1st disc brush sideways and out
from underneath the cleaning head.
4. Hold the new disc brush under the
cleaning head, then press upwards and
latch it into position.
5. Repeat the procedure for the 2nd disc
brush.
1.
1.
2.
3.
1
1
2
