QUICKSTART
5.964-272.0 10/12
Troubleshooting
1
A
B
Appliance cannot be started
A
Stand-by. Plug in the Intelligent Key.
Turn the program selection switch to
the desired programme.
B
Battery depleted.
Charge battery.
2
A
D
B
E
C
Insufficient vacuum performance
A
Clean the seals between dirt water reservoir
and cover and check for tightness, replace if
required.
B
Clean the vacuum lips on the
vacuum bar, turn or replace if
required.
C
Check suction hose for blockages; clean if
required.
Check connection between suction hose and
suction bar and suction hose and wastewater
tank.
D
Remove the coarse dirt sieve from the waste-
water reservoir and clean it.
E
Check the fluff filter, clean if required.
F
Check the setting of the vacuum bar.
G Check if the cover on the dirt water discharge
hose is closed
H
Empty wastewater tank (See "End opera-
tion", item 2).
3
A
B
Insufficient cleaning result
A
Check brush for wear and tear and clean it.
Check the brushes for wear (bristle length at
least 10 mm), replace if required.
4
A
B
D
C
Insufficient water quantity
A
Check fresh water level, refill tank if neces-
sary.
B
Increase the water volume on the regulating
knob for water volume.
C
Unscrew the lock of the fresh water reservoir.
Remove and clean the fresh water filter. In-
sert the filter and screw in the lock.
D
Remove the water distribution strip from the
cleaning head and clean water canal (only R
cleaning head).
