Kärcher A 2731 pt, Руководство пользователя, Страница: 13 / 148

13 English
Cleaning the flat pleated filter
Information : Filter status display lit red.
„ Switch the machine off.
„ Actuate the filter shaker several times.
„ If the dirt cannot be detached with the filter
shaker, remove the flat pleated filter and knock
out the dirt (for removal of filter see following
chapter).
„
Replace the flat pleated filter if dirt is stubborn.
Checking/replacing the flat pleated
filter
(Order no. 6.414-498)
Regularly check the flat pleated filter for damage.
If the flat pleated filter is damaged, replace it
immediately, otherwise the motor may be damaged.
„ Switch the unit off and open the cover on the
filter compartment.
„ Remove the flat pleated filter and replace with
a new one. Place the lattice frame back on the
filter and close the cover.
Checking and cleaning the
accessories
„ Check the nozzle, suction hose and suction
tube for blockages. They can be cleaned by
rinsing with water. Leave them to dry before
using.
Storing the vacuum cleaner
„ Switch the machine off.
„ Pull out the mains cable.
Information : Pull out the mains cable by the plug.
Never tug the cable.
If you have been working in wet-vacuuming
mode:
„ Empty the dirt container, rinse the inside if
required and leave to dry.
If you have vacuumed up viscous liquids:
„ Rinse the accessory.
„ Place the suction tubes and accessories in the
accessory bracket.