Symptom
Cause
Solution
Spray Wand
Leaks
Spray wand not
properly attached.
Turn the swivel nut of the gun clockwise
until connection is tight.
Broken o-ring or
plastic insert.
Visit www.karcher.com.au or
www.karcher.co.nz
Pump Is Noisy
Not enough petrol
or engine oil.
Check that hoses and fittings are air
tight. Turn off machine and purge pump
by squeezing trigger gun until a steady
flow of water emerges through the
nozzle.
Water Leaks
From Pump
(Up To 10 Drop
Per Minute Is
Permissible)
Loose fittings.
Check fittings.
Water seals are
damaged or worn.
Visit www.karcher.com.au or
www.karcher.co.nz
Thermal protection
device is activated.
Thermal protection device will auto reset.
Do not run pump for more than 5 minutes
without spraying.
Oil Drip
Oil seals are
damaged or worn.
Visit www.karcher.com.au or
www.karcher.co.nz
If the symptom you are
experiencing is not listed above,
or if the provided solutions do not
solve your issue, please visit our
extensive online troubleshooting
database at:
www.karcher.com.au or
www.karcher.co.nz
Page 21
Содержание 9.506-954.0
Страница 1: ...G 3000 G 3000 9 506 954 0...
Страница 3: ......