Kärcher 8.641-035.0, Руководство пользователя

Страница: 6 / 15

6
English
1. Remove kit contents and instruction
book from packaging. The Surface
Cleaner comes completely
assembled and ready for use.
2. Attach the Surface Cleaner’s inlet
plug to the end of the pressure
washer lance.
1. Connect hose to the pressure washer
and start as described in the pressure
washer’s manual.
2. Walk slowly behind the cleaning
deck, cleaning as you move forward.
NOTE: If striping or swirling occurs,
slow your pace. If striping or swirling
continues, the Surface Cleaner skirt
bristles may be worn and in need of
replacement.
When cleaning vertical surfaces,
always hold the Trigger Gun with both
hands. Do not reach under the edge of
the Surface Cleaner while the device
is in operation.
Striking any raised obstacle while
using the Surface Cleaner will cause
damage to the unit. If contact does
occur and causes vibration when
operating, stop use immediately.
Continuing to operate the Surface
Cleaner could result in serious injury.
NOTE: Always squeeze the gun’s
trigger to release and residual pressure
immediately after use. Engage the
trigger lock when not in use.
Assembly
Operation
Cleaning of Vertical
Surfaces