background image

3

Only use detergents recommended by the
manufacturer and comply with the application,
disposal and warning instructions of the
detergent manufacturers.
All current-conducting components in the
working area must be protected against
splashed water.
The gun trigger must not be jammed in position
during operation.
Suitable protective clothing must be worn if
necessary to protect against splashing from
some parts.
Never direct the water jet at people, animals,
the unit or electric components.
Vehicle tyres/tyre valves may only be cleaned
from a minimum distance of 30 cm, otherwise
the vehicle tyre/tyre valve could be damaged
by the high-pressure jet. The first indication of
this is a discoloration of the tyre. Damaged
vehicle tyres/tyre valves can be deadly
dangerous.
Materials containing asbestos and other
materials which contain substances which are
hazardous to your health must not be sprayed.
Only use detergents which have been approved
by the manufacturer of the unit.
Detergents must not be used undiluted. The
products are safe to use as they contain no
acids, alkalis or substances which are
detrimental to the environment. We recommend
that the detergents are kept out of the reach of
children. If detergent comes into contact with
the eyes wash immediately with plenty of water
and if swallowed contact a doctor immediately.
Do not lift up the bonnet while the motor is
running.

Safety instruction for high-pressure cleaners

Operation
The operator must use the unit in accordance
with the regulations. He/she must take local
conditions into account and be aware of other
people, especially children, when operating the
unit.
The unit may only be used by authorized persons
who have received training or have
demonstrated their ability to operate the unit.
The unit must not be operated by children or
juveniles (danger of accidents due to incorrect
use of the unit).
The unit must never be left unsupervised while
the motor is running.
The water jet from the high-pressure nozzle
produces a recoil on the gun. You should
therefore hold the gun and spray lance firmly.

Transport
Switch off the motor and secure the unit before
transporting.

Maintenance
Switch off the unit prior to all cleaning and
maintenance work and before replacing
components. Pull out the mains plug if the unit
is mains-operated.
Repairs may only be carried out by authorized
customer service centres or by specialists in
this field who are familiar with all the relevant
safety regulations.

Accessories and spare parts
Only use accessories and spare parts which
have been approved by the manufacturer.
Original accessories and spare parts guarantee
that the unit can be operated safely and without
any breakdowns.

Содержание 730 mxs













Отзывы: