Kärcher 1.957-105, Руководство по эксплуатации

Страница: 27 / 91

HDR 555
English
5.956-530 A 2006235 (07/03)
F. Troubleshooting
F1
Fault Possible cause Solution By whom
"fault" indicator
lamp (c) lit Filter full Clean or replace filter (see
"maintenance schedule") owner/operator
decontaminating agent-
Metering container (4) – Set unit master switch to OFF
– Top up RM 851 *)
– Switch unit back on owner/operator
Splitting agent metering
unit (3) empty – Set unit master switch to OFF
– Top up RM 847 ASF *)
– Switch unit back on owner/operator
liquid level probes (a) and
(b) soiled Clean liquid level probes with
damp cloths owner/operator
When system
switched on the
"fault" indicator
lamp (c) does not
come on
No power supply Plug in socket? Check mains owner/operator
Lamp or controls defective Replace owner/operator
After switching on
the "fault" indicator
lamp (c) does not
go out after 1 s
Filter (7) full Clean or replace filter Customer
service dept.
Metering container (3) or
(4) Top up separating agent or
decontaminating agent *)
owner/operator
liquid level probes (b)
soiled or defective Clean or replace owner/operator
unit wont start No power supply Clean or replace filter owner/operator
/customer
service dept.
dirt trap (1) Fill dirt trap or hang dirt trap
accessory kit lower owner/operator
liquid level probes soiled Check and clean all liquid level
probes (including in the dirt trap) owner/operator
/customer
service dept.
Controls defective Replace printed circuit board for
controls owner/operator
pump in the mixing
container (5) wont
switch off Probes (a) soiled or
defective Check, clean and if necessary
replace probes owner/operator
/customer
service dept.
pump in the mixing
container (5) not
working
No power supply or pump
defective Check power supply, replace pump customer
service dept.
*) Heed the safety information for chemicals!