background image

9.800-191.0  •  Rev. 01/18

OPERATOR’S MANUAL  

 PRESSURE 

WASHER  

8

OPERATING INSTRUCTIONS

HOW TO USE THE  

DETERGENT INJECTOR

WARNING: Some detergents 
may be harmful if inhaled or in-
gested causing severe nausea, 
fainting or poisoning. The harm-
ful elements may cause property 
damage or severe injury.
The machine can siphon and 

mix detergents with the use of 

Shark's detergent injector kit.

 

1.   Pull injector quick coupler 

collar back and secure on discharge nipple. Injector 

valve body arrow should point in direction of flow.

  2.  Connect high pressure hose to injector nipple se-

curing quick coupler.

  3. Start machine as outlined in Operating Instruc-

tions.

  4. Place detergent pick-up tube into container of 

detergent solution.

  5.  Turn pressure control handle counterclockwise on 

the variable pressure wand. This lowers the pres

-

sure by directing the water flow through the soap 
nozzle and allows the detergent injector to siphon 
soap. 

   6. Open trigger spray gun. Water detergent ratio is  

approximately 15 to 1.

   7.  When you finish washing, rinse by simply turning 

the variable pressure wand control handle clock

-

wise to increase pressure.

 

 NOTE:

 The detergent injector will not siphon with 

water flowing through the high pressure nozzle at 
the end of the wand.

   8. For clean up, place detergent pick-up tube into 

container of clear water and follow steps 5 and 8 

to prevent detergent deposits from damaging the 

injector.

WARNING

SOME DETERGENTS 

MAY BE HARMFUL 

IF INHALED OR 

INGESTED.

CHAU

D!

Discharge Nipple

Detergent Injector

Collar

Variable Pressure 

Control Handle

Quick Coupler

Trigger

Relief Valve

Brass Soap 

Nozzle

Variable Pressure 

Wand (VP)

High Pressure 

Hose

Spray Gun

Nozzle Quick 

Coupler

Detergent 

Pickup Tube

New & Reconditioned Equipment & Parts - www.southeasternequipment.net

Содержание 1.575-511.0

































Отзывы: