Kärcher 1.512-063.0, Оригинальная инструкция по эксплуатации

Страница: 10 / 142

10 English
Accessories and spare parts
Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at
www.kaercher.com .
Scope of delivery
The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
unpacking. If any accessories are missing or in the
event of any shipping damage, please notify your deal-
er.
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Safety devices
몇 CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Symbols on the device
(according to type of appliance)
Pressure controller
The pressure controller keeps the pressure in the steam
boiler as constant as possible during operation. The
heating is switched off when the maximum operating
pressure is reached in the steam boiler and is activated
if there is a pressure drop in the steam boiler as a result
of a steam removal.
Safety lock
The safety lock seals the steam boiler from the steam
pressure present. If the pressure regulator is defective
and overpressure occurs in the steam boiler, an pres-
sure relief valve opens in the safety lock and steam
leaks out through the lock.
Prior to restarting the appliance, contact the responsible
KÄRCHER Customer Service.
Safety thermostat
The safety thermostat prevents the device from over-
heating. If the pressure controller fails and the device
overheats, then the safety thermostat switches the de-
vice off.
To reset the safety thermostat, contact the responsible
KÄRCHER Customer Service.
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page.
Illustration A
1
Indicator light (green) - mains voltage present
2
Indicator light (orange) - heating
3
Safety lock
4
Holder for accessories
5
Park bracket for floor nozzle
6
Mains connection with mains plug
7
Non-driven wheels
8
Steering roller
9
Steam gun
10
Unlocking button
11
Selector switch for steam volume (with child lock)
12
Steam lever
13
Steam hose
14
Spotlight nozzle
15
Round brush (small, black)
16
** Power nozzle
17
** Round brush (large)
18
Manual nozzle
19
Microfibre cover for manual nozzle
20
Extension tubes (2 x)
21
Unlocking button
22
Floor nozzle
23
Hook and loop fastener
24
Microfibre floor cloth (1 x)
25
** Microfibre floor cloth (2 x)
** optional
Installation
Installing accessories
1. Insert and engage the steering roller and non-driven
wheels.
Illustration B
2. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration H
3. Push the open end of the accessory onto the spot-
light nozzle.
Illustration I
4. Connect the extension tubes with the steam gun.
a Push the 1st Push the first extension tube onto
the steam gun so that the unlocking button on the
steam gun engages.
The connection pipe is connected.
Risk of burns, surface of appliance be-
comes hot during operation
Risk of scalding from steam
Read operating instructions