10
OPERATING INSTRUCTIONS
STEP 8:
Unlock the trigger gun safety lock. Pull Trigger
gun to eliminate trapped air, wait for a steady
flow of water to emerge from the spray nozzle.
STEP 9:
Turn ON/OFF switch to ON position.
ON
OFF
USING THE ACCESSORIES
15° spray angle = Yellow nozzle
For dirt accumulation over a surface.
Quick connect nozzles
The color-coded quick connect nozzles provide a
wide array of spray widths from 15° to 65° and are
easily accessible when placed in the convenient
nozzle holder.
25° spray angle = Green nozzle
For dirt accumulation over a large surface.
65° spray angle = Black nozzle
For operating with detergents or cleaning with
low pressure.
CAUTION
High pressure in nozzle area. Risk of injury
caused by improperly locked nozzle.
▄
Make sure you hear the "click" when inserting
the nozzle tip into the quick connection.
▄
Pull the nozzle to make sure it is seated
properly before operating your unit. (See
OPERATING INSTRUCTIONS: Step 1)
WARNING
To avoid serious injury never point spray
nozzle at yourself, other persons, or animals.
40° spray angle = White nozzle
For moderate dirt accumulation over a large
surface.
STEP 10:
Pull the starter handle. If the engine fails to
start after 3 pulls, squeeze the trigger gun to
release pressure, and repeat step.
WARNING
Starter cord kickback (rapid retraction) can
result in bodily injury. Kickback will pull hand
and arm toward engine faster than you can
let go. ALWAYS relieve spray gun pressure
before pulling starter cord. Pull starter cord
slowly until resistance is felt, then pull rapidly.
For engine details see engine manual.
