6.
Insert the massive door handle plate (1) in the door.
7.
Put the mounting plate (2) on the opposite side and screw it to the massive plate with the supplied M5 screws (3).
8.
Place the cover case (4) on the mounting plate that the recesses face downwards. Press up and down until it clicks audibly.
9.
Screw the stainless steel guiding rings (5) through the cover case to the mounting plate.
10.
Insert the plastick guidance (6) on both sides of the set.
11.
Insert the lever handle (7) through the plastic lever guidance into the plate from one side of the set. Make sure that the spindle is centred and slightly tighten the
grub screw (8).
12.
Fit the lever handle from the opposite side. Screw the grub screw in the lever handle until the grub screw pierces into the spindle.
13.
Functional testing.
1
6
7
8
2
3
4
5
6
8
7
Karcher GmbH
Deutschland
Tel. +49-7264-91640
Fax +49-7264-916440
[email protected]
www.karcher-design.de
