3.3 Power Saving Modes and lock screen.
Press the “POWER” key shortly after starting up, system enter to power save and lock
mode.
Press the “POWER” key or tap the touch screen, system will return to bright in 1
second
The primary operation of the device will not stop under the power save mode, just the
LCD is shut and with black screen. For example: playing music, movie, etc
Switch OFF: When the device is in the OFF mode, press and hold the “POWER” key
for 3 seconds, the screen will display the power off interface, choose the power off
item to confirm, the system will shut automatically
【
Note
】
When the device with low battery it will alarm continuous and shut automatically
without charging. If the device can not start up please check if the battery is low, and try it
again after the battery is charged.
3.4 Battery management and charging.
3.4.1 Charge the battery for 8-12 hours to make sure the battery is fully charged when
firstly use.
3.4.2 Insert the micro port of the battery adaptor into DC slot on the device, and connect
the other side with the power socket. Then the desktop icon of the battery keep rolling
which shows it is charging, please wait until the battery is fully charged, don’t disconnect
the power when charging. Once the battery is fully charged, the Icon on the desktop will
stop rolling.
【
Note
】
In order to keep the battery working in the best condition, please pay attention as
below:
Please don’t charge the power in high temperature.
No need to release the power for this Li- battery, you can charge the power even there is
still some power in the battery, no need to wait it runs out.