-2-
INSTALLATION
According to the schematic, screw the valve to the embedded G1/2 screw thread
(Seal the connecting part by twining some rubber tape to the connecting part).
Based to applicable installation offset range and length of the outlet pipe, position
the urinal and then fix it to the wall.
Fit the gasket and the flange to the urinal, insert the outlet pipe, and then screw the
nut.
G1/2
Valve Body Decorate Set Inlet Pipe
Outlet Pipe
Decorate Set
Gasket
1061584-T01-A
ROUGHING-IN
UNIT: mm
53
46
68
132
