8-zone Telephone Alarm System
-
16
-
Instruction:
①
If the directive is correct, you will hear a short “Di” sound.
If the directive is incorrect, you will hear two long “Di” sound.
②
If you don't enter correct directives for 5 seconds, then you will hear
alarm sound for 10 seconds again, then it will wait for directives for 5
seconds……, and it will hang up automatically after repeating for 3 times,
but it also will dial this phone number in next cycle.
③
If you enter any correct directive, then it will not dial this phone
number in next cycle unless alarm occurs again.
④
If you enter directive to disarm the main unit, then it will not dial any
telephone numbers unless alarm occurs again.
After disarming, remember to arm it in time.
When receipt of alarm telephone number, you will hear alarm sound for
10 seconds, and then you will hear a short “Di” sound, and the system will
wait for 5 seconds to receive directives. Then you can press 4# on telephone
keyboard to monitor on the spot for 20 seconds, after that, you will hear a
short “Di” sound again, if you want to go on monitoring, you can press 4#
again. If you enter 3#, it will alarm on the spot with the loudest volume, and if
you enter 2#, main unit will disarm and stop alarming on the spot. If you don't
want it to dial other telephone numbers, you can press 1#, main unit will enter
arm state immediately, and press 0# to exit from telephone answering state,
and hang telephone down. If there are no effective operations within 20seconds,
main unit will hung telephone down automatically, and then go on dialing other
telephone numbers
Note: Please arm the main unit in time to avoid missing any alarm in
formation.
8.5How To Operation Remotely (Only B model have this function)
Instruction:
When operating, a short “Di” sound means the operation is
valid, and two long “Di” sound means the operation is invalid.
Dialing the number of telephone, which connects with main unit through
fix phone or mobile phone. When the ringing times (8 times by default) you
set arrives, main unit will make a short “Di” sound, then you can press“6 bits
of user's code”(000000 by default) + “#” on your phone keyboard.
If the code is incorrect, main unit will make “Di-Di” sound, and then you
can reenter the code again, and press “#” to confirm. If incorrect code was
entered for three times continuously, the phone will hung up automatically
Directive Function
1# Arm (Away home mode)
2# Disarm
3# Alarm sound on the spot
4# Monitor
0# Exit from telephone answering state
