8
CD / CD+G OPERATION
ABOUT CD-R/CD-RW DISCS
This unit is CD-R/CD-RW compatible but playback capability may vary depending on the quality of the disc, the
recording device and application software.
Note:
This unit is designed to play CDs bearing these identification logos.
If CDs do not conform to the CD or CD+G standard, they may not play
properly.
LOADING A DISC
1. Power on the unit by pressing the POWER button until it locks.
2. Press the MONITOR ON/OFF button to turn on the built-in MONITOR.
3. Grip the “OPEN” mark on the CD Door and pull gently to open it.
4. Load a disc into the compartment with the printed side facing upward.
5. Gently close the CD DOOR. The karaoke system begins to read the disc. The LED TRACK DISPLAY will
show the total number of tracks.
6. Press
PLAY/PAUSE button to play disc. (If no disc is recognized, "no" will be displayed).
PLAY/PAUSE MODE
1. To start playing, press the
PLAY/PAUSE button once, the first track “1” will be displayed and the
PLAY/PAUSE INDICATOR will light.
2. To temporarily stop playing, press the
PLAY/PAUSE button, the PLAY/PAUSE INDICATOR will flash.
3. To resume play, press
PLAY/PAUSE button again.
4. Use the MASTER VOLUME knob to increase or decrease the speaker sound.
Notes:
•
If a CD+G disc is detected, the CD+G indicator will also turn on and the lyrics will appear on the built-in
MONITOR.
•
If desired, connect the A/V cable to an external TV monitor or home stereo system instead (TV and/or
home stereo system are not included).
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. The total number of tracks will
be shown on the LED TRACK DISPLAY.
SKIP/SEARCH (For both CD and CD+G discs)
1. In stop mode, you can skip up or down to a specific track number by pressing the
/
SKIP buttons.
2. While the selected track is flashing, press the
PLAY/PAUSE button.
3. During the PLAY mode, you can skip down or up to a specific track number by pressing the
/
SKIP
buttons respectively.
4.
[For CD only]
When music is playing, hold the
/
SKIP buttons to fast-forward or fast-rewind
search through the current track.
CD OR CD+G REPEAT OPERATION
1. To repeat the current track, press the REPEAT button once. The REPEAT INDICATOR will flash. The track
will continue to play until the repeat function is turned off.
2. To repeat all the tracks, press the REPEAT button twice. The REPEAT INDICATOR will light up steadily.
All the tracks on the disc will be played repeatedly.
3. To clear the repeat function, press the REPEAT button again. The REPEAT INDICATOR will turn off.
CD OR CD+G PROGRAM OPERATION
Use this button to program and play back songs in a pre-selected order.
Note:
Programming can be done in the stop mode only.
1. Press the PROGRAM button. The PROGRAM (PROG) INDICATOR will light up.
2. Press the
/
SKIP buttons forward or back to select a desired track number.
3. Press PROGRAM button to confirm entry.
4. You can repeat the steps 2 & 3 up to a maximum of 20 tracks.
