CAUTION
When wiring 2 amplifiers in bridged mode to 1 speaker, connection (1) linking master
amplifier to slave amplifier must be wired first. Connection (2) must be performed next
between master and slave amplifier. Once connected, the speaker connection can be
made to the master and slave amplifier. This will achieve double the output into one
load. Any other form of connection may cause serious damage to the products or vehicle
and may not be covered under warranty. Please follow all wiring as illustrated or
contact an authorized Kaption Audio dealer.
Specifications
MODEL
D-500.1 D-1000.1
Rated Output Power @ 4ohms
250 W
400W
Rated Output Power @ 2 ohms
400 W
730W
Rated Output Power @ 1ohms
550 W
1000W
RMS Output Power Bridges
@ 2ohms
800 W (Dual)
1400W(DUAL)
Total Harmonic Distortion
T.H.D
< 0.3%
< 0.3%
Signal to Noise Ratio
> 90 dB
> 95 dB
Input Sensitivity
0.25 ~ 6 V
0.25 ~ 6 V
Input Impedance
20 Kohm
20 Kohm
Frequency Response
15~250 Hz
15~250 Hz
Low Pass Filter
@24dB/Oct-Variable
40~250 Hz
40~250 Hz
Subsonic Filter
@ 24dB/Oct-Variable
15~50 Hz
15~50 Hz
Bass Boost @ 45Hz
0~18dB
0~18dB
Phase Control
0-180 degrees
0-180 degrees
Idle Current
1.0A
2.5A
Fuse Rating
30A x 3
30A x 3
Dimension (W x H x L) (inches)
9-1/4”x 2-1/4”x 10-7/8”
9-1/4”x 2-1/4”x 14-5/8”
10
