- 9 -
SRX Powered Sub-woofer series
10” POWERED SUB-WOOFER
570-SRX110PS
12” POWERED SUB-WOOFER
570-SRX112PS
Warranty registration card
Name: ________________________________________________
Street: ________________________________________________
City: ________________________________________________
Province / State: ________________________________________________
Country: ________________________________________________
Postal / Zip code: ________________________________________________
Phone: ________________________________________________
Email: ________________________________________________
Model Number:
________________________________________________
Serial Number:
________________________________________________
A
uthorized
Kaption Audio dealer:
________________________________________________
Purchase Date:
________________________________________________
www.kaptionaudio.com
(416) 525-2890
Limited Warranty Information:
KAPTION AUDIO PRODUCTS COME WITH A ONE-YEAR PARTS AND LABOUR LIMITED
WARRANTY.
This warranty covers the original purchaser of a Kaption Audio product, purchased from an
authorized Kaption Audio dealer. In order to receive service, proof of purchase is required
stating the customers name, dealer name, product purchased and date of purchase.
Products found to be defective during the warranty period will be repaired or replaced with a
product deemed to be equivalent at Kaption Audio’s discretion.
If the vehicle’s source unit does not have current sensing technology
while using the high level source input then connect the
REM
the same
method as the low level input.
Double check all the previous connection installation steps, in particular
the speaker and power wiring. Securely mount the powered sub-woofer. If
everything is in order, reconnect the vehicle’s negative battery connection
and begin following the Feature Setup and Adjustments steps.
Troubleshooting Guide
PROBLEM
CAUSES AND SOLUTIONS
Power indicator is not lit
A. 12 volt wire fuse or sub-woofer fuse is
blown and needs replacement
B. Check remote turn on +12V and GND
connections ensure the ground is secured
to clean metal on the vehicle chassis.
C. Source unit not functioning properly
Power indicator is lit /
There is no Bass
A.
Inputs are not properly connected or
loose. Check and ensure connections are tight
B. Incorrect sub-woofer level control
setting – Check to see if the level is at
minimum
Protection light is on
There could be a possible short in the
speaker connections. Check for proper
speaker connection and ensure there is no
bare or uninsulated wire exposed.
Use a volt /ohm meter to check for
possible shorts in the speaker wiring.
Check the impedance of speakers . If they
are too low this may cause the amplifier
protection light to come on.
Bass sound is distorted
A. Sub-woofer gain control is set too high
B.
Sub-woofer bass control knob is set too high
C. Bass Level is set too high on head unit