KAPSCH OBU-4041, Руководство пользователя

Страница: 4 / 24

4 |
B: Setting the number of axles.
The basic vehicle axle category is set during
registration and cannot be changed by the user to
a lower axle setting.
The driver of the vehicle must always set the
number of axles according to the actual number of
axles (considering the lifted ones) including trailers
and semi-trailers.
Drivers of buses and vehicles with a max. laden
weight not exceeding 3,5 tons don’t have to
change the number of axles, as for those vehicles
a trailer is not taken into account.
To change the number of axles press the
push-button longer than 2 seconds. Continue
pressing the push-button until the correct number
of axles is indicated. A short flash of the relevant
indicator (2, 3 or 4) will confirm the setting.
Attention: the driver is responsible for setting
the correct number of axles!
C: Checking the status:
To check the OBU status press the push button
shortly and the status indicator “X” together with
the actual axle indicator “2, 3 or 4” will flash.