13
audio system can play music files from a shared
media library. Navigating is done using menus that
are sorted by artist, album, or genre. If you possess
a suitable server, such as a PC with Windows
Media Player 10 or higher, and your music library is
sorted properly, you should use the media sharing.
To do this, you will only need to set up the UPnP
server.
6.7.7 Shared Access to Media with Windows
Media Player
The most popular UPnP server is Windows Media
Player (version 10 and higher). However, you can
also use other UPnP platforms and servers. To set
up Windows Media Player for shared media access:
1.
Connect the PC with your network.
2.
Ensure that the audio system is turned on and
connected to the same network as your PC.
3.
Add the media library of the audio files and
folders in Windows Media Player (Library > Add to
Media Library).
4.
Activate the shared media access in Windows
Media Player (Library > Sharing Media...).
Additional information regarding the shared media
access with Windows Media Player can be found in
the Windows help feature.
6. Music
Playback
7. Alarm and
Sleep Timer
In addition to the clock and the calendar, there are
two practical alarms with a snooze feature as well
as a sleep timer, which switches the device off after
a specified time. Here, each alarm can be program-
med independently.
7.1 Alarm
To set or program an alarm, either press and hold
the Sleep/Alarm button or select Menu > Main
Menu > Alarms. Select the number of the alarm (1
or 2) and set the following parameters:
Enable: Off, Daily, Once, Weekends, or Weekdays.
Time: 12:00 AM (change this value as desired)
Date: 01-01-2007 (change this value as desired –
this option is normally not visible and is only shown
if you select the Once option in the Enable field.)
Mode: Buzzer, Internet radio, Spotify, DAB or FM.
Preset: Last listened to or preset station.
Volume: 0 – 32. To save and activate these settings,
scroll down and select save. The activated alarms
are shown with a symbol in the bottom left of the
playback screen. In the standby screen, the acti-
vated alarms are shown with a symbol as well as
the wake-up time. When the alarm sounds, press
Standby or Alarm to turn it off.
7.2 Sleep Timer
To program the sleep timer, press the button Sleep/
Alarm repeatedly to switch between the availabl
intervals: Sleep OFF, 15 MIN, 30 MIN, 45 MIN or
60 MIN. The remaining time until the device turns off
is displayed at the bottom of the playback screen.
Note:
If no input signal is detected, the device will
switch to standby mode after 15 minutes regardless
of operating mode.
