Kapro Prolaser 897, Руководство пользователя

Страница: 11 / 28

11
Inclined Plane (Manual Mode)
The Rotary Las
er can be set up to create a single or dual directional
incline plane at any angle. This is very helpful for laying inclined
concrete surfaces, ensuring run-off from pathways, and laying water
and sewage lines. The Rotary Laser can be used with an angle bracket
(not included), and set to any angle greater than ±4°.
1. Set up the Rotary Laser approximately level.
2. Press the Power key. The power indicator will light up.
3. Press the Auto/Manual Key. When the Manual Indicator lights, the
Rotary Laser is in manual mode.
4. Chose the X & Y direction by pressing the Clockwise Rotation or
Counterclockwise Rotation Key.
5. Using the X-Axis and Y-Axis arrows, adjust the slope until it suits your
requirements.
6. To make the beam more visible, change the rotating speed
(see Changing Rotating Speed), change scanning mode (see Scan
Function), or use the Laser Detector to detect the
laser beam (see Laser
Detector).
7. You can use the remote
control to control the Rotary
Laser (see Using the Remote
Control).
8. To return to Automatic mode,
press the Auto/Manual key. The
Manual Indicator will turn off.
9. To turn the Rotary Laser off, press the Power key.