background image

4

FEATURES

  This laser tool automatically determines the horizontal  

  and vertical plans.

  This laser emits 1 horizontal 360° and 2 orthogonal 360°  

  vertical green beams, that intersect on 4 walls, floor and  

  ceiling. 

  Self-leveling in automatic mode when the laser is   

  positioned within its self-leveling range which is ±2.5º 

  Visual warning when the laser level is out of leveling  

  range.

  Pulse mode emits pulses that can be detected by a detector.

  Max. indoor working range - 20 m (65’) with green goggles. 

  The max. detectable range of the laser in pulse mode is  

  70m (230’).  

  Manual mode allows angular layout/marking.

•    IP65 Rated for water and dust protection.

  Locking mechanism to protect the pendulum during  

  transportation.

  1/4" and 5/8" tripod threads.

  Shock resistant rubber over molded casing. 

  Multi-purpose magnetic mount.

  Battery compartment for optional use with 4 AA Alkaline  

  batteries.

  Charger.

  

      NOTE 

This device contains precision components 

sensitive to external shock, impact or falls 

that may compromise its functionality. Handle 

with care to maintain its accuracy. 

Содержание Prolaser 883 GREEN





























Отзывы: