18
Stud Layout Setting
You can define a set measurement to use when doing
equidistant layouts.
For example, if you need to layout studs at 24cm apart,
you can define this distance from the Settings menu F3.
Once you have defined the distance:
1. Select the Dynamic Measuring mode.
2. Position the laser at the beginning of your layout line.
3. From the starting point, move the laser along a straight line. When you
get close to the defined distance, the laser displays arrows to help
you find the exact point and beeps when you are aligned.
Laser Pointer Mode
You can activate the laser pointer from the Settings
menu F4.
Press or to turn the laser on and off.
Maintenance
• Clean the aperture lens and the
Kapro Laser Distance Measurer body using a clean soft cloth only. Do
not use solvents.
• If the laser measurer is exposed to water, dry it before storing.
• Remove the battery if the laser measurer will be unused for a long
period of time.
