Page 9 of 10
You can now fix the Rafter End
Caps using the screws and caps
provided.
Installing the Rainwater System
Please Note:-
A slight angle is required along both the front and side gutters. This is to ensure that the
water flows along the gutter and into the down-pipe.
Decide which end of the canopy the down spout is to be (where the flow of water won’t be a
problem). This will then determine the position of the “Stop End Outlet”. Blank off relevant end.
Position the bracket closet to end (2) use 1 screw, this will allow for adjustment to the angle.
Fit guttering into bracket.
Using Stop end Outlet as guide mark guttering if it requires cutting down to size. Add additional
sections if required using “Joining” piece. So as whole roof will have guttering under its edge for
water disposal but not too much as will look unsightly and also be unsupported.
tel: 01543 543 046 email: [email protected] web: carports-canopies.com
