Updating the anti-virus database
35
mailing list table, it means there are no rights for the respective server. The rights
can be granted using the
Add rights
button (for more details please refer to
section B.1.1 on page 84).
After that switch to the
Updating source
tab and set the update receiving
parameters: (for more details please refer to section B.1.2 on page 86):
•
Updating source
– from the Internet or LAN resources. If you update
the database via the Internet, the dialog box will display a list of HTTP
and FTP servers of Kaspersky Lab. If you push updates from a
network resource, a list of shared directories will be displayed.
In case of disconnection from the main source of updates, three more
attempts will be made within the 15-minute interval (the next attempt
is made in the event that the previous connection fails). Using the
Schedule
tab you can change the number of repeated attempts to
connect with the source, and the interval. During each attempt to
connect, the list of update source addresses is used from the
beginning (the main address). The addresses are tried in sequence
until the connection is established or the list of addresses is
exhausted.
•
Updates copying mode
– specifies what files will be downloaded from
the update source; all the anti-virus databases available from the
source or only the new and changed ones.
If you have selected an Internet server as a source of the updates and plan to
use a proxy server to connect to the ISP, you will have to set up its parameters
on the
Proxy
tab (for more details please refer to section B.1.4 on page 93).
Then go to the
Schedule
tab and schedule the unattended start of the task and
set the reconnection parameters in the event of disconnection during the updates
downloading (for more details please refer to section B.1.5 on page 94).
[A.P.1]
On the
Event log
tab you can specify the name and the location of the log
file, which will contain detailed information about the results of the task
execution. In addition, you can set the log file size and specify the events to be
logged (for more details please refer to section B.1.3 on page 90).
On the
E-mail notification
tab, you can enable notifications about task
completion for a specified group of users. The program uses the mail system
installed in the network to deliver its notifications.
To make your settings come into effect, use the
Apply
button located in the
lower part of the dialog window
Anti-virus database updating
(<Server
name>):<Task name>
or click
OK
to save changes and close the dialog box. To
close the dialog box without saving recent changes, click
Cancel
.
The task settings can also be changed in the application setup window
Kaspersky Anti-Virus 5.6 on <Server name>
.