INSTRUCTION MANUAL
Q
If there is a problem with the interface
•
First, check the LED
- Green LED blinking: No problem
- Red LED: Bad interface
- No LED: Check power and CAN connection
Q
If the screen is black
•
LVDS Cable is bad or bad contact
Question and Answer
Q
If the mode cannot be switched
•
Check CAN connect
Q
If the screen size ratio is not displayed properly
•
Check the DIP switch vehicle settings
Caution
The device must not be installed in where it interferes driving
•
brake pedal, steering wheel, airbag etc.
LVDS cable must be connected correctly according to the manual
Insulate the end of wire by using electrical tape
The installation should be done by expert
Q
If you cannot switch to the rear screen
•
Check the packing setting
•
OSD Menu – option – RearCam-Det
