6
7
Finishing the Install
5.
Apply gentle pressure to the
molle panel so it sits flush against
the interior trim.
6.
Ensure the spacing around the
Molle Panels is even and correct.
7.
Use a 3mm bit to carefully drill the
three lower mount holes.
Depending on preference, you can
drill without removing the panel.
Otherwise mark the placement and
remove the panel to drill.
8.
Secure the molle to these
holes using the supplied self
tapping screws and washers.
9.
Repeat for the other side.
10.
That’s it, you’re done! If you are
installing a Shelf or Light Cargo
Barrier with your panels, continue
with the instructions in their
fitting guides.
9
8
10
