4
5
Let’s get to work.
Preparing the Vehicle
1.
Pry open the plastic covers on the
rear grab handles with a small
flatblade screwdriver or trim tool.
2.
Use a 10mm socket to remove the
rear handles. Set aside.
Installing the Brackets
To install the Light Cargo Barrier:
3.
Install the handle brackets to the
roof mounts, as pictured. Ensuring
the nutsert is towards the front of
the vehicle, tighten to secure.
To install with the Standalone Shelf
4.
Follow the instructions provided
with the Standalone Shelf, then
skip to step 10 below.
Please note pre-2023 Standalone Shelves
(KS0265) require the shelf bracket to be
layered. Refer to our website for more details.
To install with the Side Molle Panels:
5.
Ensure you have the correct molle
panel for each side, with the ‘K’
positioned at the back of the vehicle.
6.
Sandwich the barrier handle
brackets over the Molle Panel
top mounts. Ensuring the handle
bracket nutsert is towards the front
of the vehicle.
7.
Secure the top using the M6 bolts
and washers.
8.
Install the Side Molle Panel lower
mount bracket using it’s included
M6x50 bolt.
9.
Check the spacing and position of
the Side Molle Panel, and tighten all
bots to secure.
1
2
2
3
5
8