
POLY ADIRONDACK GLIDER
EASY ASSEMBLY INSTRUCTIONS
Step 1 (Attach arms to seat)
Set the seat on its side then set the arms on the side of the side ensuring the bolt holes align.
Insert a short bolt into the washer, top hole of the front arm brace and seat. Slide on another
washer and tighten nut onto bolt. Using another of the same bolt, repeat this process for the
lower hole.
For both holes on the back arm brace, insert a long bolt into the washer and set in the holes of
the back brace and seat. You may use a hammer to pound the bolts down until flush.
(Repeat this process for the opposite side)
1