7
Supporting your digital lifestyle
™
Audio Troubleshooting Guide
Kanto’s YURI subwoofer was carefully tested and inspected during production and it is rare
that a unit is damaged during shipping. If any issues occur during the set up of your YURI
subwoofer, your questions may be answered in the Troubleshooting guide below.
• Make sure the power cable is connected to
the subwoofer and power outlet.
• Ensure that the power outlet is providing
power.
• Verify that the power switch (8) on the rear
of the subwoofer is in the “On” position
and Standby Power switch (6) is in the
“On” position.
• You can switch it back to “Auto”after
verifying normal operation.
• Set the volume of the source to its
highest level and reduce the volume of
the subwoofer. Low source volume can
negatively affect dynamic range.
• Test a different song or source to isolate
the issue.
• Adjust crossover to match the rest of
the system.
• Ensure the audio source is playing audio.
• Check that the audio cable connected to
and from the source is firmly connected.
Test another audio cable if available.
• Verify that the volume of the subwoofer is
not at its minimum level.
• Ensure you are using an RCA to RCA
subwoofer cable.
• Verify if the noise is coming from the
source by removing all sources from the
subwoofer.
• Make sure it is not a power issue by
trying a power outlet that is on a
different circuit.
• Check that the audio cable connected
to and from the source is firmly seated.
Try a different cable or source to isolate
the issue.
2.
1.
4.
6
.
3.
5
.
The green light on the rear of the
subwoofer is illuminated but there’s no
audio playing.
None of the lights on the rear panel are
illuminated.
You are experiencing poor audio
quality.
You are experiencing Buzzing, Hissing
or Distortion.
There’s no audio coming from the
subwoofer.
Subwoofer is going into standby while
listening to audio.
• Check that the RCA cable connected to
and from the subwoofer is firmly seated.
Try a different cable or source to isolate
the issue.
• Make sure the subwoofer is connected
to a power outlet and is set to “On” or
“Auto”.
• Increase the volume of the subwoofer.
• Set the volume of the source to its
highest level. Low source volume can
inadvertently trigger standby mode.
888.848.2643
