background image

2

Introduction

Table of Contents

Table of Contents / Introduction  . . . . . . . . . . . . .  2

Supplied Parts & Hardware . . . . . . . . . . . . . . . . . . 3

Setup - Step 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Setup - Steps 2 to 3  . . . . . . . . . . . . . . . . . . . . . . . 5

Setup - Steps 4 to 6  . . . . . . . . . . . . . . . . . . . . . . . 6

Setup - Step 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Thank you for choosing a Kanto universal tilting extension projector ceiling mount. The P301 is designed to mount TV 

projectors weighing up to 22 lbs (10 kg). This mount kit allows for installations 15” to 18” (37 to 45cm) from the ceiling, 

and can tilt ±90° to allow mounting to sloped ceilings and on the side of beams.  The P301 provides a 360° swivel and 

±20° tilt to level your projector.

Read these instructions fully before installation of this mount. If you do not understand these directions, or have any 

doubts about the safety of the installation, please consult a qualified installation contractor to install this mount. Make 

sure there are no defective or missing parts. Do not use defective parts. If you are uncertain whether the part is defective 

contact Kanto directly at 1-888-848-2643 or [email protected]. Kanto can not be liable for property damage or 

injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. 

CAUTION  

The maximum loading weight is 22 lbs (10 kg). This projector mount is intended for use up to the maximum 

weight restrictions indicated. Use with products heavier than the maximum weights indicated may result in instability 
causing possible injury. 

CAUTION 

The ceiling you plan to affix the Kanto mount to must be able to support more than 4 times the weight of 

the projector and the ceiling mount combined. Do not use this product for any purpose other than to mount a 
projector as outlined in this manual. Improper installation may cause damage to your projector or serious injury. This 
product should not be mounted to drop ceilings, cinder block or old concrete ceilings. Consult a qualified installation 
contractor if you are unsure about the type of ceiling you may have.

See installation video online at: 

www.kantoliving.com

Visit our website at www.kantoliving.com for the most recent version of this manual

Содержание P301









Отзывы: