$
Supporting your digital lifestyle
™
7
Step 5: Tilt the TV
Loosen the tilt bolts on both sides of the mount plate using
the 5mm Allen Key (
O
), as shown in Diagram G. Tilt the TV
to the desired angle and tighten both tilt bolts.
Step 6: Cable Management
Step 7: Level TV
Route your TV cables using the cable management
covers installed to the mount arms, as shown in Diagram
H. Access the clip by pulling the clip at the top and laying
the cable inside. The cable management clips can be
relocated to the opposite side of the arm by removing
the screws on the bottom of the clip, moving it to the
other side, and replacing the screws.
Diagram G
Tilt Bolts
Diagram H
P
