Kantech INTEVO-CMP-1TB, Быстрая настройка

Страница: 12 / 114

10
http://www.kantech.com/Support/KantechRegistration.aspx
NOTE: You must be logged into the Kantech website in order to have
access to the registration page. If you do not have a valid login for the
Kantech website, go to http://www.kantech.com/Register/Register.aspx
and fill out the registration form.
6-
Click on INTEVO Camera registration
7-
Enter your email address. A copy of the license key will be sent to
this address when the process is completed.
8-
Click on “ would you like to register an American Dynamics Illustra
camera?” .
9-
Enter the following information:
•
Camera MAC Address (See AD Illustra 400 or 600 user manual
for info)
•
INTEVO Server MAC address (see step 4 above)
10-
Click “REGISTER” .
11-
If you are activating multiple camera channels, click “Click here to
create an additional key” and enter the other the additional
information.
12-
Take the “KEY” information and go to: Configurations / HDVR
server / System Setup in the HDVR software.
13-
Enter the “KEY” information in the “LICENSE” field and click
“APPLY” .
NOTE: The license key is case sensitive.
14-
Your INTEVO camera channels are now activated and ready to use.
How to activate IP camera channels on INTEVO using an
INTEVO-IPCAM01 license.
1-
Install and log into your INTEVO unit
2-
Log into the AD IP Video (HDVR) software
3-
Go to Configurations / HDVR server / System setup.
4-
Take note of the MAC address of your INTEVO unit.
5-
Go to the Kantech web registration page by going to the address
below:
http://www.kantech.com/Support/KantechRegistration.aspx
NOTE: You must be logged into the Kantech website in order to have
access to the registration page. If you do not have a valid login for the
Kantech website, go to http://www.kantech.com/Register/Register.aspx
and fill out the registration form.