KANSAI SPECIAL PX302-4W, Инструкция

Страница: 9 / 15

6
5555----2 2 2 2 Needle drop and needle side stroke Needle drop and needle side stroke Needle drop and needle side stroke Needle drop and needle side stroke
The needle side stroke on this machine is 5.55mm (302-4W) and 7.4mm (302-5W).
To increase the stroke, loosen screw B and move it up in the slot. To decrease the stroke,
loosen screw B and move it down in the slot. The point of the needle should be centered
left to right between fingers of the needle plate when the needle drops to the needle plate.
Adjustment is made by loosening screw C. The needle side stroke movement should
start when the point of the needle moves up from the top surface of the needle plate.
The needle side stroke movement should stop when the point of the needle reaches the top
surface of the needle plate. This timing adjustment is made by worm gear D. To adjust
the position of the needle drop, loosen screws A and turn the needle bar as required.
5555----3333 To install the looper To install the looper To install the looper To install the looper
To set the angle and height of the looper, insert the looper fully into looper holder A and
tighten screw B.
< Note >
Position of the needle drop 1, 2, 3, 4, 5 from
the left side, 5 is the extreme right end. 5,
6, 7, 8, 1 from the right side
< Note >
Position of the needle drop 1, 2, 3, 4 from
the left side, 4 is the extreme right end.
4, 5, 6, 1 from the right side
＜ ＜ ＜ ＜
M M M M odel odel odel odel
： ： ： ：
302 302 302 302 ----4W 4W 4W 4W
＞ ＞ ＞ ＞ ＜ ＜ ＜ ＜
M M M M odel odel odel odel
： ： ： ：
333302 02 02 02 ----5W 5W 5W 5W
＞ ＞ ＞ ＞
＜ ＜ ＜ ＜
M
M M
M odel
odel odel
odel
： ： ： ：
302
302 302
302 ----4W
4W 4W
4W
＞ ＞ ＞ ＞ ＜ ＜ ＜ ＜
M
M M
M odel
odel odel
odel
： ： ： ：
302
302 302
302 ----5W
5W 5W
5W
＞ ＞ ＞ ＞