【
2
】
MACHINE SPEED
2-1 Machine speed & direction in which the machine pulley runs
Refer to the table below for maximum and standard
speeds of the Series. To extend machine life, run
the machine approximately 15-20% below the
maximum speed for the first 200 hours of operation
(approx. 1 month). Then run the machine at the
standard speed. The machine pulley turns
clockwise as seen from the end of the machine
pulley.
2-2 Motor & belt
Motor : 3-phase
，
2-pole
，
400W clutch motor
Belt
: M type V belt
Select the proper motor pulley according to the
machine speed (refer to the motor pulley outer
diameter on the table below). Adjust where to
position the motor by pressing the finger onto the
middle of the belt so that 1~2cm deflection can be
obtained (see the illustration on the right).
< Machine speed >
Type
Maximum speed
Standard speed
HDX1101 3000SPM
2500SPM
HDX1102 3000SPM
2500SPM
< Motor pulley selection table >
Machine speed (SPM)
Motor pulley
outer diameter
(mm)
50Hz 60Hz
60
2500
2950
70
2900
3450
80
3300
3900
90
3700
4400
2
H
H
D
D
X
X
s
s
e
e
r
r
i
i
e
e
s
s
