KANSAI SPECIAL DFB Series, Инструкция, Страница: 15 / 37

12
【
3
】
MACHINE SPEED
3 - 1 M a c h i n e s p e e d & d i r e c t i o n i n w h i c h t h e m a c h i n e p u l l e y r u n s
Refer to the table below for maximum and standard
speeds of the Series.
To extend machine life, run the machine
approximately 15~20% below the maximum speed
for the first 200 hours of operation (approx. 1
month). Then run the machine at the standard
speed. The machine pulley turns counterclockwise
as seen from the end of the machine pulley.
3 - 2 M o t o r & b e l t
Motor : 3-phase, 2-pole, 400W clutch motor
Belt
: M type V belt
Select the proper motor pulley according to the
machine speed (refer to the motor pulley outer
diameter on the table below). Adjust the position of
the motor by pressing the finger onto the middle of
the belt so that 1~2cm deflection can be achieved
(see the illustration on the right).
< Machine speed >
Model Maximum speed Standard speed
DFB1404P 4500 4000
DFB1412P 4000 3500
< Motor pulley selection table >
Machine speed (SPM) Motor pulley
outer diameter
(mm)
50Hz 60Hz
60 3150 2950
70 2300 3450
80 3300 3900
90 3700 4400
100 4100 (4900)
110 4500 (5400)