KANSAI SPECIAL DFB MR-S Series, Перечень деталей, Инструкции

Страница: 13 / 19

MR-S
INTRODUCTION
Thank you for your purchasing Kansai Special's DFB/MR-S Series.
Read and study this instruction manual carefully before beginning any of the
procedures and save it for later use.
1.
This instruction manual describes adjustments and maintenance procedures on the
MR-S series. Refer to the DFB-G Series instruction manual for basic adjustment.
2. Before starting the machine, check to make sure the pulley cover, safety cover, etc.
are secured.
3. Before adjusting, cleaning, threading the machine or replacing the needle, be sure to
turn off the power.
4. Never start the machine with no oil in the reservoir.
5. Refer to the parts list as well as this instruction manual before performing preventive
maintenance.
6. The contents described in this instruction manual are subject to change without notice.
I n d i c a t i o n o f s e r i a l n u m b e r
Model
Zip code
2 0 0 0 0 0 1
Serial number
The date of manufacture
(Manufactured in 2020)
MR-S
1
CONTENTS
1. SPECIFICATIONS
1-1 Stitch type ························································································· 2
2. NEEDLES & THREADING THE MACHINE
2-1 Needles ····························································································· 2
2-2 Replacing the needle ··········································································· 2
2-3 To thread the machine ········································································· 3
3. MACHINE SPEED
3-1 Machine speed & direction in which the machine
pulley runs ························································································· 5
3-2 Motor & belt ······················································································· 5
3-3 Attaching direct motor ········································································· 5
4. SEWING MACHINE INSTALLATION
4-1 Cutting the machine table ···································································· 6
5. MR-S ADJUSTMENT
5-1 Adjustment of bottom stripper blade ······················································ 8
5-2 Adjustment of ruffling arm ··································································· 8
5-3 Timing of ruffling arm ········································································· 9
5-4 Change ruffling ratio ··········································································· 9
6. CLEANING THE MACHINE
·························································· 10