Kanomax 3080, Руководство пользователя, Страница: 9 / 27

８
3. Measurement Procedure
Power ON

To start the instrument, push and hold the power switch. A language on the screen
shown when login is a language which was used on a previous measurement.
Measurement

Set any required parameters on the setting menu or the measurement menu.

Select a measurement mode and set measurement parameters.

Go back to the main screen and tap the measurement start button to start measurement.

A measurement usually ends automatically. To end a measurement during a measurement,
tap the measurement stop button.

To check measurement results, use the history menu.
Power OFF

By pushing and holding the power switch at least for 2 seconds on any screen, the power
will be turned off.
Error

A flow error will be detected by the self-diagnostic function. But an ongoing measurement
will continue.
Flow rate
Do not put anything, including the dustproof cap, on the
sampling head.
If the error is still shown, the fan might be broken or
reach the end of its life.