Kannad SafeLink AIS SART2, Руководство пользователя

Страница: 14 / 34

4.2 Activation Process
1. Pull and break the red Anti-tamper Cap
to reveal the activation panel.
2. Hold the ON Button for 2 seconds:
- The ON LED flashes Orange during
GNSS acquisition
- The ON LED flashes Green once the
GNSS fix is acquired.
WARNING: DO NOT COVER GNSS AREA WHILE ACTIVE (see Figure 6)
Figure 6: GPS/GNSS AREA Location
NOTE 1: The GNSS receiver is activated (cold start) when ON is depressed
and the Orange LED indicator will initially flash changing to a Green LED
indication when a position fix has been resolved.
NOTE 2: The ON LED flashing sequence is the SOS Morse code flashed
every 30 seconds.
NOTE 3: The red Anti-tamper Cap breaks once pulled out and cannot be re-
installed by the user.