25-63-50
© Orolia S.A.S.
Abbreviated Component Maintenance Manual
S1825501-01 / S1825501-02
Page 11
AUG 12/2013
E.
CR12 disassembly
(1)
Disconnect connector J3.
(2)
On board I402 (70), unsolder and remove CR12 (85).
Figure 3002 / 25-63-50-991-06
CR12 removal
Cleaning
TASK 25-63-50-100-801A01
1.
Cleaning
A.
General
(1)
Clean the housing with absorbent cotton-wool (C01) soaked in alcohol (C02).
(2)
Clean the connectors with a soft brush (C03) or a lint-free rag (C04). If necessary, blow them out
with low pressure dry compressed air.
Check
TASK 25-63-50-200-801A01
1.
Check
A.
General
(1)
Make sure there is no oxidation on the pins of connectors.
Dessicant
Foam wedge
CR12
J3
I402 Label