manualshive.com logo in svg

Kanmor 538e, Руководство по установке и эксплуатации

Поделиться
Скачать
Kanmor 538e Скачать руководство пользователя страница 2

2 of 24

© 2011                  D 538e - 02/11

Congratulations on the purchase of your new kanmor thermostat.

This manual will step through the complete installation, programming and sequence 
of operation for this control. At the back, there are tips for control and system 
troubleshooting.

Getting Started

Preparation

kanmor or jeweller screwdriver
Phillips head screwdriver

•
•

Wire Stripper

•

Tools Required

 ------------------------------------------------------

 ------------------------------------------------------

Materials Required

 --------------------------------------------------

 --------------------------------------------------

2, 3.5 x 25 mm Wood Screws
0.75 or 1.0 mm

2

 flex cable 

(Low Voltage Connections)

•
•

Optional Adapter Plate 008e (for 
installation on 85 x 85 mm box)

•

Installation

Table of Contents

Getting Started ..............................2

Installation .........................................2

Caution ..........................................2
Preparation ....................................2
Removing The Thermostat Base ...3
Mounting The Thermostat Base ....3
Thermostat Wiring .........................4
Testing the Thermostat Wiring ......4
Mounting the Thermostat ..............5
Cleaning the Thermostat ...............6

Switch Settings ..................................6

User Interface ....................................7

Display...........................................7
Button Operation ...........................7

Symbols Description .....................7
Settings ....................................8-14

Sequence of Operation .................... 15

Heating Operation ....................... 15
Cooling Group Operation ............ 16
Schedules ................................... 17
Scenes (System Override) .......... 17

Troubleshooting ............................... 18

Error Messages ......................18-21
Frequently Asked Questions .......22
Job Record ..................................23
Technical Data .............................23
Limited Warranty and Product 
Return Procedure ........................24

Caution

Improper installation and operation of this control could result in damage to the 
equipment and possibly even personal injury or death. It is your responsibility 
to ensure that this control is safely installed according to all applicable codes and 
standards. This electronic control is not intended for use as a primary limit control. 
Other controls that are intended and certified as safety limits must be placed into 
the control circuit.

Содержание 538e

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды