Kanmed BABYBED BB100, Руководство пользователя

Страница: 18 / 20

User Manual BB100-400 /070
Page 18 of 20
11 Warranty Statement
Kanmed warrants the purchaser that the Kanmed BabyBed is free from defects in materials
and workmanship for a period of
5 years from the date of delivery. The warranty does not
apply to plastic parts, mattresses, cables and tents.
The sole obligation of Kanmed with respect to any such defect is limited to the repair with
new or re-manufactured parts or, at the discretion of Kanmed, replacement of the equipment
or refunding of the purchase price.
This warranty shall not apply if the product has been modified, adjusted or repaired other
than by Kanmed or by organizations authorized by Kanmed or modified, adjusted or repaired
not in accordance with written instructions provided by Kanmed. Neither shall the warranty
apply if the equipment has been subject to misuse, negligence or accident.
These warranties are made on the condition that prompt notification of a defect is given to
Kanmed or its authorized dealers within the warranty period.
Kanmed shall have the sole right to determine whether a defect exists.
Kanmed shall not in any case be liable for special or consequential damages arising from the
breach of warranty, breach of contract, negligence or any other legal theory.
12 EMC Guide Lines
The BabyBed fulfils the applicable requirements of IEC 60601-1-2:2007 Electromagnetic
compatibility (EMC).
The BabyBed shall be used in a hospital environment, but not close to HF surgical equipment
or MR cameras.
WARNING: Use of accessories and cables other than those specified or provided by the
manufacturer of this equipment could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and result in improper operation.
WARNING: Portable RF communications equipment (e.g. mobile phones, radio transmitters,
antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to
any part of the BabyBed, including cables specified by the manufacturer. Otherwise,
degradation of the performance of this equipment could result.
NOTE: The EMISSIONS characteristics of this equipment make it suitable for use in industrial
areas and hospitals (CISPR 11 class A). If it is used in a residential environment (for which
CISPR 11 class B is normally required) this equipment might not offer adequate protection to
radio-frequency communication services. The user might need to take mitigation measures,
such as relocating or re-orienting the equipment.
For further information about EMC compliance with the specified emissions and immunity
standard, test levels, etc. please contact Kanmed.
13 Disposal
When the Kanmed BabyBed have reached end of life, it should be recycled in
accordance with the EU 2002/96/EC (WEEE) directive if applicable.