Assembly Instructions
Kangaroo II
20
L
L1
L2
Part 4: Drawer Unit and Front Panel
L1
L2
L2
L1
L4
L3
s3
Slide
Panel L4
into grooves on
Panels L, L1 and L2.
Connect
Panel L3
to
Panels L1 and L2
using
s3 Screws.
L
L1
L2
Insert
c1 Cam
Bolts
on
Panel L
into
cam locks
on
Panels
L1 and L2.
Tighten cams
and apply
c2
Cam Covers.
6x35 Cam Bolt
x4
c1
5
⁄
8
“ Cam Cover
x4
c2
3.5x35 Screw
x4
s3
To reach the pre-drilled screw
holes on the sides of
Panels L1
and L2
, you will need to tilt the
drawer runners.
Remove the front and back screws
on the drawer runners, leaving the
middle screw installed. Pivot the
drawer runners to access screw
holes as shown here.
